Hello good day to all ... this is my setup 1 Linux Wireless Access Point, connected are 4 wireless gateway in which i needed to apply shaping ... ok here is the weird part... clients on each gateway download files from the Acess Point ... a 500 mb file through ftp on gateway 1 which is up to 64 kbps ... the result is from 60-64 kbps speed which is fine ... on gateway 2 which is 128 kbps ... the result is varying from 130 - 132 kbps (why does it exceed)? but it is acceptable nevertheless on gateway 3 which is up to 256 kbps ... the result is the lowest rate clients can get is up to 285-286 above limit ?!?!! why did that happen... on gateway 4 .. which is up to 512 kbps ... the rate of the client is up to 600+ kbps ... why is that so ?! anyway here is my script for anyone who can help ...thanks one thing is when i ftp 2 files ... the speed is higher than the ceiling limit .... kernel is 2.4.22 ... with QoS enabled .... tc qdisc add dev wlan0 root handle 1:0 htb tc class add dev wlan0 parent 1:0 classid 1:1 htb rate 1024kbps ceil 1024kbps tc class add dev wlan0 parent 1:1 classid 1:10 htb rate 1kbps ceil 64kbps tc class add dev wlan0 parent 1:1 classid 1:20 htb rate 1kbps ceil 128kbps tc class add dev wlan0 parent 1:1 classid 1:30 htb rate 1kbps ceil 256kbps tc class add dev wlan0 parent 1:1 classid 1:40 htb rate 1kbps ceil 512kbps tc filter add dev wlan0 parent 1:0 protocol ip u32 match ip dst 10.40.40.245 flowid 1:10 tc filter add dev wlan0 parent 1:0 protocol ip u32 match ip dst 10.40.40.246 flowid 1:20 tc filter add dev wlan0 parent 1:0 protocol ip u32 match ip dst 10.40.40.247 flowid 1:30 tc filter add dev wlan0 parent 1:0 protocol ip u32 match ip dst 10.40.40.248 flowid 1:40 __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
