I have need to use HTB on multiple (5) IPs. The present setup has the DSL connection going to a switch and then each computer with an external IP configures the external interface to listen on that IP. I have had TERRIBLE luck trying to use iptables to DNAT so if DNAT needs to be done, any advice that includes tested and working examples would be sincerely appreciated. There are 3 computers connected to the switch: 1) yesican.chsoft.biz 206.72.89.154 This also listens on eth1:0 to 206.72.89.158 as ns.chsoft.biz 2) news.chsoft.biz 206.72.89.155 3) phil.chsoft.biz 206.72.89.156 yesican (AKA ns) and news are both Slackware Linux boxes and each has a working HTB script. news' (non-business hours) script is at ftp://andthatsjazz.org/pub/lartc/ultimatePM.sh. phil is a Windows 2000 Server and between it and the switch is a SonicWall (hardware) firewall. How should I set up so that one computer can listen to all 5 IPs, shape and then distribute the shaped packets to the correct server? How can I implement ingress shaping / policing to limit the combined incoming rate, regardless of IP, to about 700K (the connection is actually 730K in and 690K out). Only because it REALLY annoys me to drop an already received packet, I would prefer to shape than to drop, but I am presently policing. I would like to avoid, for space and room temperature reasons, another computer if possible. May I please hear your $.02? Thanks! gypsy _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
