gypsy wrote:
Johan Lindqvist wrote:
I've gotten wondershaper to work in my linux box, which is part of a 3
computer network that shares the same dsl connection. The linuxbox
handles most bulk down and uploading, and the other 2 are mainly for
surfing and such.
What I need from wiondershaper is that it should perform it's tasks
with all of the traffic to the dsl modem, but do nothing with the
internal traffic (traffic to 192.168.). This is important since I do a
lot of remote x'ing to the linuxbox, and when that traffic to is shaped,
it's to slow to work.
/johan
You must tell us a lot more about your setup than above if you expect
help.
Does the linux box have more than one NIC?
Are you DNATting? If not, HOW is the DSL shared?
What makes you say that the wonder script is interfering with internal
traffic?
In a "normal" setup, the linux box will have 2 NICs, one connected to a
switch/hub serving the internal network and the other directly connected
to the DSL. Wonder then is configured to shape on the internet
(external) interface (only). That means it does not touch anything on
the internal NW.
You might be able to set up a modified Wonder such that the default /
bulk does 100Mbit (assuming your internal NW is 100) by setting RATE =
CEIL = 100Mb and then shape everything where the IP matches your DSL IP
so that internet stuff never gets into the bulk queue. Sort of
"reverse" logic, but that is the way I dealt with an FTP server. In the
absence of a firewall mark in FTP packets, there is no good way to
identify them, so instead handle the stuff you CAN identify and let the
rest go into bulk.
gypsy
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Well, there is a better way. I was able to mark ftp outgoing traffic
using iptables. I shape all outgoing packets on a port range and throw
the rest in a 100mbit bulk. Works like a champ. i have the outbound
ftp passive ports and the active port marked. Let me know if you want
to see my script.
Mark
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
