1.I have commands to make filters like your old but have no this: "ht 2:$table1: ht 3:$table2:" what is it? 2. What was your problem? I'm new to this list and dont have your previous email. > Old command: > tc filter add dev $dev protocol ip parent 12: u32 ht 2:$table1: ht > 3:$table2: match ip dst $ip/32 flowid 12:$classid > > New command: > tc filter add dev $dev protocol ip parent 12: prio 5 u32 ht 2:$table1: > ht 3:$table2: match ip dst $ip/32 flowid 12:$classid > > Who would have thought that a prio would cause that much trouble? I > mean, I know in the documentation it says that it is required for CLASS > commands, but since there's nothing on filters, I had no clue. And > usually if a command requires a parameter, it will error immediately and > not wait for 2045 entries. Also, why the hell would the priority cause a > problem like that to begin with?! > > Weird. Anyways, THANKS EVERYONE! (gypsy, Catalin, and Ed especially) It > all works, it's very resource friendly, and all is good again (and I get > to keep my job)! The processor is only about 20% in use now. I'm very > grateful for the hashing filter suggestion from Ed. Thanks a ton. I will > be posting a How To shortly so others can do the same if they ever need > to. Thanks again! > > Adam Towarnyckyj > > -----Original Message----- > From: lartc-admin@xxxxxxxxxxxxxxx [mailto:lartc-admin@xxxxxxxxxxxxxxx] > On Behalf Of gypsy > Sent: Thursday, July 15, 2004 8:37 PM > To: adamt@xxxxxxxxxxxxx; LARTC > Subject: Re: TC Hashing Filters > > Adam Towarnyckyj wrote: > > Any tc filter command I try to > > add from here on out gives me the same error even if I try it manually > > instead of using the script. > > Adam, > > That is a killer. > > Please read the following and then, when we both have the same > information, I'm going to try again to assist you. > > HINT TO READERS: I hope someone else will help us both because I have > obligations that I'm stealing time from that I can ill afford. > > There is a LARTC mailing list thread dated (about) 24 thru 26 June 2003 > between Trevor Warren and Michael Ulitskiy whose Subject is "u32 > clarification...limits on 2000>???" > > Please use your favorite method to find it. Note that there may be > kernel issues not mentioned by them; kernels change. > > I'd like to suggest that you see if anyone involved in that thread will > send you a testing script; perhaps you could find a way to start with a > working setup and then apply minor changes until either it breaks or it > suits you. > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
