Check if you have HTB support in your kernel. it must be in kernel/net/sched ----- Original Message ----- From: "Antonin Karasek" <lists@xxxxxxxxxxxxxx> To: <lartc@xxxxxxxxxxxxxxx> Sent: Thursday, July 22, 2004 6:58 PM Subject: HTB & tc > Hi, > I'm trying to make run a simple shaping *through HTB*. I have compiled a > new kernel 2.4.21. > > First command from > http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm > said: > # tc qdisc add dev eth0 root handle 1: htb default 12 > RTNETLINK answers: Invalid argument > > I tryed both standard tc from Debian stable and > http://luxik.cdi.cz/~devik/qos/htb/v2/tc.gz > this one... > > I tryed htb.init-v0.8.5 from SourceForge with htb-lartc.tar.gz > configuration from the same site. The script doesn't report any error, but : > skatach:~/bin# ./htb.init-v0.8.5 start > skatach:~/bin# tc filter show dev eth0 > skatach:~/bin# tc class show dev eth0 > skatach:~/bin# tc qdisc show > > As I guess, it means, that there isn't any class. It isn't, what I want :( > > Any ideas, where the problem can be? > > Many thanks. > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
