Hi, I do not have much of experience with frottle, but the project is well documented and my configuration is almost exact copy of the default one: This are non-commented lines from my master's /etc/frottle.conf: mastermode 1 clientmode 1 daemon 1 masterip 10.0.0.249 queuesize 100 hiports 22,53,110,25,80,443 winterface eth0 statsfile /var/www/html/frottle.html pollparams 60000,10,6000,7,5000,5,4000 infofile /var/www/html/frottle_srv.html Because behind the master there's a wired LAN segment, it's also acting as a client to itself. The only difference between master's and clients configuration is the omition of 'mastermode 1', so clients' .conf: clientmode 1 daemon 1 masterip 10.0.0.249 queuesize 100 hiports 22,53,110,25,80,443 pollparams 60000,10,6000,7,5000,5,4000 Our wireless network includes 2 LinkSys WAP11 APs (the leaf nodes), and at the center there's a D-Link DI-614+. The two WAP11 can not here each other transmitions - it's a classic hidden-node effect. Btw, DI-614+ is quite a crap, so I'm using PheeNet 3.4.1 firmware on it - see http://www.muehlenhof-oberursel.de/22001.html for details. M. Stavrev > > Hi, Martin. > > which is your experience with frottle ? > > Which is your external AP ? > > Can you post your frottle configure files ? > > regards > > andres > _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
