Martin Devera (devik@xxxxxx) wrote: > > > remove cburst 1 > > > > thanks! > > > > class htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 65536 rate 5Mbit > > ceil 5Mbit burst 20Kb/8 mpu 0b cburst 8151b/8 mpu 0b level 0 > > Sent 45107618 bytes 42138 pkts (dropped 0, overlimits 0) > > rate 608617bps 548pps backlog 40p > > lended: 42098 borrowed: 0 giants: 0 > > tokens: 3908 ctokens: -11502 > > > > but I see only 330Kbytes/sec flow (half of 5Mbit rate) > > >From above I see rate 608617bps = 4.7MBit. Probably it will settle down > after some while. I suspect there is problem in your way of measuring the > rate. Also you can deliberately increase (c)burst to more than default, > say to 20kB - the larger the burst it the more insensitive to CPU load > it is ... OK, I removed all manual settings of burst/cburst, and it works just fine. htb3 rocks! 30%/90% CPU Usage on 80Mbit stream with >500 classes on htb3/htb2 (P4 2Ghz, 2.4.25 kernel with APIC, e1000 NIC) -- Michael Vasilenko _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
