devik (devik@xxxxxx) wrote: > I see you have cburst 0 ! It is not allowed > and is described in docs. What was commands to > create the classes ? /sbin/tc.3 qdisc add dev eth0 root handle 1:0 htb default 2500 r2q 100 /sbin/tc.3 class add dev eth0 parent 1:0 classid 1:1 htb rate 200mbit ceil 200mbit quantum 200000 /sbin/tc.3 class add dev eth0 parent 1:0 classid 1:2 htb rate 200mbit ceil 200mbit quantum 200000 /sbin/tc.3 class add dev eth0 parent 1:1 classid 1:3500 htb rate 10Mbit ceil 10Mbit burst 2048b cburst 1 /sbin/tc.3 qdisc add dev eth0 parent 1:3500 handle 3500: sfq perturb 5 /sbin/tc.3 class add dev eth0 parent 1:2 classid 1:5500 htb rate 20Mbit ceil 20Mbit burst 2048b cburst 1 quantum 60000 /sbin/tc.3 qdisc add dev eth0 parent 1:5500 handle 5500: sfq perturb 5 /sbin/tc.3 filter add dev eth0 parent 1:0 protocol ip prio 50 handle 3500 fw classid 1:3500 /sbin/tc.3 filter add dev eth0 parent 1:0 protocol ip prio 50 handle 5500 fw classid 1:5500 tc.3 -V tc utility, iproute2-ss020116 > On Tue, 6 Apr 2004, Michael Vasilenko wrote: > > > devik (devik@xxxxxx) wrote: > > > > > I suppose the drop you see is CPU bound ? Did you profiled it > > > > > again ? > > > > > > > > No, CPU is about times more in idle state in htb3, and > > > > 5x lowest data rate. AFAIK, htb3 scheduler is faster, so that is the > > > > reason of moving to htb3. > > > > > > ok then it is config issue probably. you should pin it down > > > to smallest possible number of classes for test (say up to > > > 5 classes) and then use tc -s show class ... to see internal > > > statistics. Look for classes with small (or negative) > > > tokens or ctokens - these are in throttling state and are > > > slowing throughtput - then think if it is ok .. > > > > ok > > I'm creating root with 200Mbit > > and parent with 10Mbit/1Mbit > > > > > > class htb 1:5500 parent 1:2 leaf 5500: prio 0 quantum 131072 rate 10Mbit ceil 12Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0 > > Sent 25443954 bytes 17155 pkts (dropped 0, overlimits 0) > > rate 143050bps 97pps backlog 25p > > lended: 17130 borrowed: 0 giants: 0 > > tokens: 335 ctokens: -787 > > > > class htb 1:1 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7 > > Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0) > > rate 2723bps 49pps > > lended: 0 borrowed: 0 giants: 0 > > tokens: 8241 ctokens: 8241 > > > > class htb 1:2 root rate 200Mbit ceil 200Mbit burst 263690b/8 mpu 0b cburst 263690b/8 mpu 0b level 7 > > Sent 25406104 bytes 17130 pkts (dropped 0, overlimits 0) > > rate 144147bps 98pps > > lended: 0 borrowed: 0 giants: 0 > > tokens: 8195 ctokens: 8195 > > > > class htb 1:3500 parent 1:1 leaf 3500: prio 0 quantum 13107 rate 1Mbit ceil 1Mbit burst 2Kb/8 mpu 0b cburst 0b/8 mpu 0b level 0 > > Sent 482570 bytes 8712 pkts (dropped 0, overlimits 0) > > rate 2739bps 49pps > > lended: 8712 borrowed: 0 giants: 0 > > tokens: 12501 ctokens: -294 > > > > > > so, rate is 1,2Mbit > > and what is meaning of negative ctokens? > > > > > >From data you send one can't decide what's bad. In any case > > > and as I said before, behavioue changed a bit so that results > > > can be a bit different a may need tc script changes. > > > > > > devik > > > > > > _______________________________________________ > > > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > > > -- > > Michael Vasilenko > > > > > > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ -- Michael Vasilenko _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
