RE: Multihome routing question

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I'll take a stab at this . . .

Try a traceroute to your ISP's DNS server or even the ISP's gateway to
you.  (This is the next hop beyond your onsite gateway to the world.)
This will tell you what interface your stuff chooses when you want to go
out to the public Internet.  Also check your firewall rules on this box
(iptables -L -v -n) to see if you're blocking anything.  And also look
to see if you have any alternate routing tables going on (ip rule list
and stuff like that).  

- Greg Scott


-----Original Message-----
From: lartc-admin@xxxxxxxxxxxxxxx [mailto:lartc-admin@xxxxxxxxxxxxxxx]
On Behalf Of eduard@xxxxxxxxxxxx
Sent: Friday, January 30, 2004 3:06 AM
To: lartc@xxxxxxxxxxxxxxx
Cc: eduard@xxxxxxxxxxxx
Subject:  Multihome routing question


Hello,

I am new to network routing and I need help configuring a linux box with
two ethernet cards. In this case it's a Linux RH 7.3 box, in a cabinet
that already has a couple of Windows servers. The Windows server routing
is below as an example.

The Linux box has an out-of-band interface at 10.130.36.38 and a public
eth at 62.50.8.84. I had to add a route for the private interface so I
could access its ports. However, since I did that, the Linux box cannot
access the internet. The incoming requests to 62.50.8.84 are fine, I can
hit the web service fine, but the net is not visible from the linux box.
I  think it's just a matter of adding a route but am not sure how.

Interestingly enough I can ping the outside machines but cannot browse
over the net. I remember that this worked fine before I added the route
to  the private interface, so it must be a routing problem and not some
other  issue.

The Linux routing table:

[root@sylvester root]# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
62.50.8.80      0.0.0.0         255.255.255.248 U     0      0        0
eth0
10.130.36.32    0.0.0.0         255.255.255.240 U     0      0        0
eth1
172.17.1.0      10.130.36.34    255.255.255.240 UG    0      0        0
eth1
10.0.0.0        10.130.36.33    255.0.0.0       UG    0      0        0
eth1
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0
lo
0.0.0.0         62.50.8.81      0.0.0.0         UG    0      0        0
eth0

[root@sylvester root]# ip route
62.50.8.80/29 dev eth0  scope link
10.130.36.32/28 dev eth1  scope link
172.17.1.0/28 via 10.130.36.34 dev eth1
10.0.0.0/8 via 10.130.36.33 dev eth1
127.0.0.0/8 dev lo  scope link
default via 62.50.8.81 dev eth0


The Windows server routing, which works fine:

[c:\4nt]route PRINT
========================================================================
===
 Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...44 45 53 54 42 00 ...... NOC Extranet Access Adapter 0x1000004
...00 0b cd 1c 99 84 ...... Compaq NC7780 Gigabit Server Adapter
0x1000005 ...00 0b cd 1c 96 95 ...... Compaq NC7780 Gigabit Server
Adapter
========================================================================
===

========================================================================
===
 Active Routes:
Network Destination        Netmask          Gateway       Interface
Metric
          0.0.0.0          0.0.0.0       62.50.8.81      62.50.8.83
1
         10.0.0.0        255.0.0.0     10.130.36.33    10.130.36.36
1
     10.130.36.32  255.255.255.240     10.130.36.36    10.130.36.36
1 10.130.36.36  255.255.255.255        127.0.0.1       127.0.0.1       1
   10.255.255.255  255.255.255.255     10.130.36.36    10.130.36.36
1
      62.50.0.221  255.255.255.255     10.130.36.33    10.130.36.36
1 62.50.0.222  255.255.255.255     10.130.36.33    10.130.36.36       1
       62.50.8.80  255.255.255.248       62.50.8.83      62.50.8.83
1 62.50.8.83  255.255.255.255        127.0.0.1       127.0.0.1       1
   62.255.255.255  255.255.255.255       62.50.8.83      62.50.8.83
1
        127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1
1
       172.17.1.0  255.255.255.240     10.130.36.34    10.130.36.36
1
        224.0.0.0        224.0.0.0     10.130.36.36    10.130.36.36
1 224.0.0.0        224.0.0.0       62.50.8.83      62.50.8.83       1
  255.255.255.255  255.255.255.255       62.50.8.83               2
1
Default Gateway:        62.50.8.81
========================================================================
===
 Persistent Routes:
  Network Address          Netmask  Gateway Address  Metric
         10.0.0.0        255.0.0.0     10.130.36.33       1
      62.50.0.221  255.255.255.255     10.130.36.33       1
      62.50.0.222  255.255.255.255     10.130.36.33       1
       172.17.1.0  255.255.255.240     10.130.36.34       1

Any help would be appreciated.
Eduard



_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/


[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux