On Sunday 18 January 2004 12:58 pm, JaNzUn wrote: > Hi, i´ve read about this problem but i didn´t find any solution. > > I have a router with nat like that: > internet - eth0 - Router - eth1 - Lan > > I made a htb script for shaping outgoing in eth0 and it works great. The > problem begin with the incoming traffic... Like other people said, when > somebody in the lan uses the tipical download accelerator, the line is > out because the bandwidth is divided by conexions. So, i decided to use > htb (with one class, filter and iptables mark per ip) for shaping an > ceil traffic if it isn´t in use. All ok. Now i need to shape by ip, so i > use esfq... but nothing happend. > A few lines of my script can be read here: (Only for 2 ips, there are a > lot of them, but i do the test with two machines, one with daccelerator > an other with simple download). > > $tc qdisc add dev eth1 root handle 2:0 htb default 20 > $tc class add dev eth1 parent 2:0 classid 2:2 htb rate 10mbit ceil > 100mbit $tc class add dev eth1 parent 2:2 classid 2:9 htb rate 10mbit > prio 2 $tc class add dev eth1 parent 2:2 classid 2:10 htb rate $DOWN > ceil $TDOWN prio 2 > $tc class add dev eth1 parent 2:2 classid 2:11 htb rate $DOWN ceil > $TDOWN prio 2 > $tc class add dev eth1 parent 2:2 classid 2:20 htb rate 10kbit ceil > 100mbit prio 2 > > $tc qdisc add dev eth1 parent 2:10 handle 10: esfq perturb 10 hash dst > $tc qdisc add dev eth1 parent 2:11 handle 11: esfq perturb 10 hash dst > > $tc filter add dev eth1 parent 2:0 protocol ip prio 2 handle 1 fw > classid 2:9 > $tc filter add dev eth1 parent 2:0 protocol ip prio 2 handle 10 fw > classid 2:10 > $tc filter add dev eth1 parent 2:0 protocol ip prio 2 handle 11 fw > classid 2:11 > > iptables -A POSTROUTING -t mangle -o eth1 -p tcp --destination > 192.168.1.88 -j MARK --set-mark 10 > iptables -A POSTROUTING -t mangle -o eth1 -p tcp --destination > 192.168.1.222 -j MARK --set-mark 11 > > I know rates are a bit stranges, but its only a test and htb works > fine. The problem is the esfq, not work! > > Has anybody make to work esfq? In this case, could you put a real script > with it? > Or... anybody knows any metod to split incoming traffic by ip testing > and working? > > Thanks. I think if you want esqf to do dst filtering, then you should use htb to seperate interactive traffic and have just one class for everyones bulk traffic with one esqf attached. You are already splitting with htb the ips to 10 and 11 then giving them one queue each - they should go to one esqf. I'm not sure, but shouldn't you use flowid rather than classid in the $tc filter add lines. Andy. _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
