|
Hi,
I've set up a Linux box with redhat on to act
as an internet gateway and I'm running into a few problems. Its got two
adsl modems connected to it, both connected to seperate 512kbs lines. Now
I've followed the simple source routing in the advanced routing howto to the
letter but it doesnt work.
I've got it autoconnecting on startup and redhat
puts ppp1 as the default gateway, this is then setup for masquerading for the
entire network. Therefore I've tried setting up ppp0 as the deafult
gateway for only one computer (10.0.0.11), as it says at http://lartc.org/howto/lartc.rpdb.html#LARTC.RPDB.SIMPLE I've
done everything it says there and im 99% sure I've put the right ip addreses in
etc. When Ive gone through it that computer is no longer able to access
the net (the rest of the network is unaffected).
I'm pretty sure its the way ppp0 is configured, if
I set it up so 10.0.0.11 uses ppp1 instead of ppp0 (ip rule add
default via xxx.xxx.xxx.xxx dev ppp1 table chris) it works fine but
obviously thers no point in that.
Hope all this makes sence to someone, it baerly
does ti me. May thanks in advance.
Chris
|
