Does anyone have a resons why the following commands will fail? my kernel (ver 2.4.21) .config seqment is below. I am running Debian with latest iproute and iptables. Thanks in advance, Bryan. Bryan Nolen Lead Developer http://Arc.Net.AU <http://arc.net.au/> http://cdonline.com.au <http://cdonline.com.au/> /*****************************************************/ WonderShaper 1.1a using tc binary with htb support /*****************************************************/ # sh -x ./wshaper + DOWNLINK=1200 + UPLINK=220 + DEV=ppp0 + NOPRIOHOSTSRC=80 + NOPRIOHOSTDST= + NOPRIOPORTSRC= + NOPRIOPORTDST= + '[' '' = status ']' + ./tc qdisc del dev ppp0 root + ./tc qdisc del dev ppp0 ingress + '[' '' = stop ']' + ./tc qdisc add dev ppp0 root handle 1: cbq avpkt 1000 bandwidth 10mbit RTNETLINK answers: Invalid argument + ./tc class add dev ppp0 parent 1: classid 1:1 cbq rate 220kbit allot 1500 prio 5 bounded isolated RTNETLINK answers: No such file or directory + ./tc class add dev ppp0 parent 1:1 classid 1:10 cbq rate 220kbit allot 1600 prio 1 avpkt 1000 RTNETLINK answers: No such file or directory + ./tc class add dev ppp0 parent 1:1 classid 1:20 cbq rate 198kbit allot 1600 prio 2 avpkt 1000 RTNETLINK answers: No such file or directory + ./tc class add dev ppp0 parent 1:1 classid 1:30 cbq rate 176kbit allot 1600 prio 2 avpkt 1000 RTNETLINK answers: No such file or directory + ./tc qdisc add dev ppp0 parent 1:10 handle 10: sfq perturb 10 RTNETLINK answers: No such file or directory + ./tc qdisc add dev ppp0 parent 1:20 handle 20: sfq perturb 10 RTNETLINK answers: No such file or directory + ./tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb 10 RTNETLINK answers: No such file or directory + ./tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10 RTNETLINK answers: Invalid argument + ./tc filter add dev ppp0 parent 1:0 protocol ip prio 11 u32 match ip protocol 1 0xff flowid 1:10 RTNETLINK answers: Invalid argument + ./tc filter add dev ppp0 parent 1: protocol ip prio 12 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 flowid 1:10 RTNETLINK answers: Invalid argument + ./tc filter add dev ppp0 parent 1: protocol ip prio 16 u32 match ip src 80 flowid 1:30 RTNETLINK answers: Invalid argument + ./tc filter add dev ppp0 parent 1: protocol ip prio 18 u32 match ip dst 0.0.0.0/0 flowid 1:20 RTNETLINK answers: Invalid argument + ./tc qdisc add dev ppp0 handle ffff: ingress RTNETLINK answers: Invalid argument + ./tc filter add dev ppp0 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 1200kbit burst 10k drop flowid :1 RTNETLINK answers: Invalid argument /*********************************/ Kernel 2.4.21 .config segment... /*********************************/ # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_CSZ=y CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_INGRESS=y CONFIG_NET_QOS=y CONFIG_NET_ESTIMATOR=y CONFIG_NET_CLS=y CONFIG_NET_CLS_TCINDEX=y CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y CONFIG_NET_CLS_U32=y CONFIG_NET_CLS_RSVP=y CONFIG_NET_CLS_RSVP6=y CONFIG_NET_CLS_POLICE=y # Networking options # CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_NAT=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_TOS=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_ROUTE_LARGE_TABLES=y Bryan Nolen Lead Developer http://Arc.Net.AU <http://arc.net.au/> http://cdonline.com.au <http://cdonline.com.au/> _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
