> > I have some strange problems with shaping. Now I'm testing Linux as > > shaping bridge. Redhat Linux 7.3, kernel plain 2.4.23 with latest HTB patch > > from devik and PSCHED_CLOCK_SOURCE changed to PSCHED_CPU. > > What I'm doing wrong? > I'm not sure, but I think that the network statistics are counting every bit > that's been put on the wire. And maybe this also includes retransmits. OK. I did few more tests and got following results for transmited bytes. Interface is shaped at 512kbps, tests run for 100 seconds. - tc class reports 5910888 bytes (~432kbps) - ifconfig eth1 reports 6704130 bytes (~523kbps) - tc rate reports rate 66140bps (6614000 bytes, 516kbps) As you see difference is quite essential. But if I count packets: - tc class reports 15444 packets - ifconfig eth1 reports 15504 packets Results are practically the same. Could it be that HTB somewhere does not update bytes statistics? Mindaugas _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
