Hi, I have some problems with my routing configuration. My router has two connections to the internet, eth1 (2Mbit) and ppp0 (ADSL). On the eth1 connection I do a ?snat and on ppp0 I do masquerading. I use iptables to mark packets / connections in the -t mangle -A PREROUTING and OUTPUT chains. The marks (1 and 2) are used to decide which route do use to route a packet. My routing configuration: #ip rule list 0: from all lookup local 32678: from all fwmark 1 lookup EXT_2M_RT 32679: from all fwmark 2 lookup EXT_DSL_RT 32680: from 80.129.94.144 lookup EXT_DSL_RT 32681: from 195.145.7.218 lookup EXT_2M_RT 32766: from all lookup main 32767: from all lookup default #ip route list 217.5.98.16 dev ppp0 proto kernel scope link src 80.129.94.144 195.145.7.216/29 dev eth1 proto kernel scope link src 195.145.7.218 172.25.0.0/16 dev eth0 proto kernel scope link src 172.25.0.1 127.0.0.0/8 via 127.0.0.1 dev lo scope link default via 195.145.7.217 dev eth1 #ip route list table EXT_DSL_RT 80.129.94.144 dev ppp0 scope link src 80.129.94.144 195.145.7.216/29 dev eth1 scope link src 195.145.7.218 172.25.0.0/16 dev eth0 scope link src 172.25.0.1 127.0.0.0/8 dev lo scope link src 127.0.0.1 default via 217.5.98.16 dev ppp0 src 80.129.94.144 #ip route list table EXT_2M_RT 80.129.94.144 dev ppp0 scope link src 80.129.94.144 195.145.7.216/29 dev eth1 scope link src 195.145.7.218 172.25.0.0/16 dev eth0 scope link src 172.25.0.1 127.0.0.0/8 dev lo scope link src 127.0.0.1 default via 195.145.7.217 dev eth1 src 195.145.7.218 For my routed packets, incoming on eth0, everything works fine, but for the packets generated by the router itself I have problems. For example I mark RSYNC packets, with mark 2, to use the DSL connection. The router sends out the packet over the DSL connection, but with the IP address of eth1? Somebody knows what?s wrong? Greets, JanÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿËÂ?¨¥?x%?Ë,S ù??Y??÷lõ¯ç?m§ÿÿ?¨¥?©ÿvÏZþy?¨¥?©ÿ?+-?wèþV«µÁÎY3ÿ?Ûiÿÿåj»\þ?à
