I'm using the ADSL/Cable Wondershaper 1.1 but the last class (1:30) is always empty.
The other 2 classes have some traffic.... but the 1:20 is receiving the most of it...
Is this the class that bulk traffic goes right?
No, Bulk traffic goes into 1:20 1:30 is super-slow for specific hosts you define.
look at the top of the # low priority OUTGOING traffic - you can leave this blank if you want # low priority source netmasks NOPRIOHOSTSRC= # low priority destination netmasks NOPRIOHOSTDST= # low priority source ports NOPRIOPORTSRC= # low priority destination ports NOPRIOPORTDST=
It's doing exactly what it should be doing.
regards,
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: damion@xxxxxxxxxxxx SnapGear --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org ---
_______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
