... is on SourceForge: http://tcng.sourceforge.net/dist/tcng-9h.tar.gz md5sum 9b7c520f92b312a5a00da12bad35f57d See also http://tcng.sourceforge.net/ This release upgrades to the current 2.4 kernels, fixes a few minor glitches in the build system, and adds the options --no-manual and --with-manual to configure, so that tcng can be build without the documentation (also, configure uses --no-manual if it can't find latex or dvips). The complete list of changes is below. - Werner ----------------------------------- CHANGES ----------------------------------- Version 9h (7-NOV-2003) ----------------------- - tcc/ext/Makefile: dependencies now only include .c files compiled in that directory, removing a warning when building RPMs - split tcsim/Makefile into Makefile.unclean and Makefile.clean to avoid rebuilding klib and ulib when cleaning up after configuration changes - configure is compatible with 2.4.22 and 2.4.23 (pre-release, tested with 2.4.23-pre9) - setup.klib generates linux/smp.h needed for 2.4.22 - tcsim/trace.c and tcsim/modules/sch_discard.c adjust ..._drop prototype for interface change in 2.4.22 - setup.klib clears LANG before using sed on [^ -~] - setup.klib adds "err" and "error_report" members to "struct sock" in af_netlink.c (for 2.4.23) - updated kernel version example in tcng/README from 2.4.21 to 2.4.22 - configure: added options --no-manual and --with-manual (abbreviations -m and -M) to allow building tcng with or without the documentation (suggested by "raptor") - configure: automatically assumes --no-manual if either latex or dvips is not in the PATH -- _________________________________________________________________________ / Werner Almesberger, Buenos Aires, Argentina wa@xxxxxxxxxxxxxxx / /_http://www.almesberger.net/____________________________________________/ _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/