Here is my scenario, # create bridge 0 brctl addbr br0 brctl stp br0 off brctl addif br0 eth0 brctl addif br0 eth1 ifconfig eth0 up ifconfig eth1 up ifconfig br0 up #create vlan 106 vconfig add eth0 106 vconfig add eth1 106 #create bridge 106 (vlan 106) brctl addbr br106 brctl addif br106 eth0.106 brctl addif br106 eth1.106 I expect packet with vlan 106 would go to br106 and the others to br0. Am I right? ----- Original Message ----- From: "Ryan Goldberg" <rgoldber-list-lartc@xxxxxxxxxxxx> To: "Kristiadi Himawan" <kristiadi_himawan@xxxxxxxxxx> Cc: <lartc@xxxxxxxxxxxxxxx> Sent: Monday, October 06, 2003 5:58 PM Subject: Re: Htb on trunked line > On Mon, 2003-10-06 at 01:14, Kristiadi Himawan wrote: > > So you already succeed on bridging per vlan, > > could you tell me how to make such kind of configuration > > I'll see if I can remember to grab the config from work today. But > there shouldn't be much do it. For instance our linux box sits between > a router and a 2924. We trunk on port 24, and bridge 23 vlans across > into ports 1 - 23. The linux box has eth0 and eth1, and interfaces > eth0.1, eth1.1 through eth0.23, eth1.23 are configured (vlans), and then > we create 23 bridges br1 through br23 and apply shaping to eth0.x and > eth1.x. > > Ryan > > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
