Ethloop

[Yves Bergeron <yvesb@xxxxxxxxxxxxxxxx>]

Hi,

This is my scenario

I have a 100mbit for 400 routes and the rest of Internet is at 2mbit

#
#                1:1
#              /     \
#            1:2      1:12
#           /   \
#       1:10   1:11


        tc qdisc del dev lo root handle 1: htb default 10
        tc qdisc add dev lo root handle 1: htb default 10

        tc class add dev lo parent 1: classid 1:1 htb rate 100mbit quantum 1500

        tc class add dev lo parent 1:1 classid 1:2 htb rate 1950kbit

        tc class add dev lo parent 1:2 classid 1:10 htb rate 1500kbit ceil 1900kbit
        tc class add dev lo parent 1:2 classid 1:11 htb rate 100kbit ceil 1000kbit

        tc class add dev lo parent 1:1 classid 1:12 htb rate 98mbit quantum 1500

        tc qdisc add dev lo parent 1:10 handle 10: sfq perturb 10
        tc qdisc add dev lo parent 1:11 handle 11: sfq perturb 10
        tc qdisc add dev lo parent 1:12 handle 12: sfq perturb 10



Is my class Ok ?


I want to make simulation with Ethloop, How can I known which flow
correspond to which classid ?


# lo will be used to TX and RX
0       i       0       lo
0       i       1       lo
0       i       2       lo


Thank you

Yves Bergeron
yvesb@xxxxxxxxxxxxxxxxxxxxxxxx
==============================

_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/