Re: [LARTC] Over value in CEIL parameter..

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 29 July 2003 07:28, Rio Martin. wrote:
> On Thursday 24 July 2003 23:28, you wrote:
> > On Thursday 24 July 2003 04:22, Rio Martin. wrote:
> > Can you post your script and the output of tc -s -d class show dev eth0?
>
> tc qdisc del dev eth0 root
> tc qdisc add dev eth0 root handle 1 htb default 0 r2q 10
Bad idea.  Class 0 is a special one and I dont't think you want unclassified 
traffic go out at full speed ....

> tc class add dev eth0 parent 1: classid 1:10 htb rate 40Kbit ceil 40Kbit
> burst 1 cburst 1
Argh.  Remove the burst and cburst parameters so htb can calculate the smalles 
one for you.  I think that's your problem.

> tc qdisc add dev eth0 parent 1:10 handle 10 sfq perturb 10 quantum 1500
> tc class add dev eth0 parent 1:10 classid 1:9100 htb rate 20Kbit ceil
> 20Kbit burst 1 cburst 1
> tc filter add dev eth0 parent 1:0 protocol ip prio 200 handle 100 fw
> classid 1:9100
>
> root@xxx:/etc/sysconfig/htb# tc -s -d class show dev eth0
> class htb 1:10 root rate 40Kbit ceil 40Kbit burst 0b/8 mpu 0b cburst 0b/8
> mpu 0b level 7
>  Sent 1406352 bytes 12398 pkts (dropped 0, overlimits 0)
>  rate 532bps 2pps
>  lended: 0 borrowed: 0 giants: 0
>  tokens: -7521 ctokens: -7521
>
> class htb 1:9100 parent 1:10 leaf 9100: prio 0 quantum 1000 rate 20Kbit
> ceil 20Kbit burst 0b/8 mpu 0b cburst 0b/8 mpu 0b level 0
>  Sent 1406352 bytes 12398 pkts (dropped 0, overlimits 0)
>  rate 504bps 2pps
>  lended: 12398 borrowed: 0 giants: 0
>  tokens: -15041 ctokens: -15041

Stef

-- 

stef.coene@xxxxxxxxx
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net



[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux