On Tuesday 22 July 2003 03:12, tanxuey wrote:
> Hi all!!!
>
>
> I do not know why my letter was sent back again and again!!!
Maybe because there are a lot of ! in the subject and not everybody is
appreciating that.
> Trever said my ceil value was wrong!!!
If you have a 10 mbit and your ceil is 10mbit, you will not shape any traffic
because the network is the bottlenect.
> My test enviroment is local ethernet network, computer 18 has 10Mbit
> network card, and HTB+BRIDGE box has two 100Mbit network card,
>
> computer 29 and 26 have 100Mbit network card too. 26 and 29 link to
> HTB+BRIDGE eth0 by 100Mbit SWITCHER not HUB.
>
> My ceil parameter set to 10Mbit wrong?
>
> Yestoday, I found the performace of HTB is related to r2q value and ceil
> value. If I set ceil to 100kbps,set r2q to 1,it is ok.
> If I set ceil to 200kbps,set r2q to 1.tc always say "HTB: quantum of class
> 10001 is big, Consider r2q change".
>
> In my test environment that I first mentioned,I saw the same information.
>
> Can you tell me their relation??
See faq page on www.docum.org
Stef
--
stef.coene@xxxxxxxxx
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
