On Fri, 27 Jun 2003, Nikolay Datchev wrote: > I assume that your current ethernet card speed is 100 Mbit/s > > Just do > > mii-tool eth0 -A 10BaseT Or you could do, tc qdisc add dev ethX root tbf rate 10Mbit latency 50ms burst 1540 (I'm really not sure about latency and burst, because I usually have the rate set at 220kbit. YMMV). > -- Nikolay Datchev > > On Fri, 27 Jun 2003, olagoke Metibemu wrote: > > > HELLO ALL, > > I WILL BE VERY HAPPY IS ANY BODY ON THISLIST CAN TELL ME HOW TO SET MY ETHERNET LAN SPEED TO 10MBPS ON A REDHAT BOX. > > > > THANKS > > > > GOKE > > NEWBIE Regards, Brad Lay ( brad /at/ coombabah.net ) W) http://coombabah.net/ "I used to be indecisive, now I'm not so sure."
