Re: [LARTC] does tc support mpls ?

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I assume that your current ethernet card speed is 100 Mbit/s

Just do

mii-tool eth0 -A 10BaseT

and this will set your card to 10BaseT-only speeds.

If you get an error, your card does not support MII.

And, at last, this is not the right maillist for this question.

-- Nikolay Datchev

On Fri, 27 Jun 2003, olagoke Metibemu wrote:

> HELLO ALL,
> I WILL BE VERY HAPPY IS ANY BODY ON THISLIST CAN TELL ME HOW TO SET MY ETHERNET LAN SPEED TO 10MBPS ON A REDHAT BOX.
>
>
> THANKS
>
>
>
> GOKE
> NEWBIE
>
> Ashutosh Pattanaik <ashutosh.pattanaik@xxxxxxxxxxxxxx> wrote:
> hi everybody,
> i just want to know if tc provides any bandwidth management through the
> tc_index field of the sk_buff or the exp bits of the shim header in an mpls
> cloud ? if so ,how it is done?
> ashutosh.
>
> _______________________________________________
> LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>
> ---------------------------------
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!



[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux