I know what imq is. Everything is O.K. with download traffic. I need to shape Upload traffic. But the problem is that u32 filter does not match correct source address for forwarded packets - only gateway's. Bye, Tadas ----- Original Message ----- From: "peyrak" <peyrak@xxxxxxxxx> To: "Tadas" <tadas-lartc@xxxxxxxxxxxxxxxx> Sent: Sunday, April 27, 2003 11:51 AM Subject: Re: [LARTC] Masquerade and tc filter > imq > > ########################### > # Jirka Pirko # > # jirka@xxxxxxxx # > # xpirko@xxxxxxxxxx # > # cellular: +420608065259 # > # icq uin: 136218111 # > ########################### > ----- Original Message ----- > From: "Tadas" <tadas-lartc@xxxxxxxxxxxxxxxx> > To: <lartc@xxxxxxxxxxxxxxx> > Sent: Sunday, April 27, 2003 8:43 AM > Subject: [LARTC] Masquerade and tc filter > > > > Hello, > > > > I am building a gateway/shaper. As always, there is a locl network > > 192.168.3.0/24 and connection to internet. Gateway masquerades these > > connections. I need to limit upload and download speed for certain IPs. > With > > download traffic everything is ok: i have put filters on the local netwrok > > interface. But I can't set up filters by source address on outgoing > > traffic - the interface which makes masquerading. I have noticed that all > > traffic have the same router source address set. > > > > So, what's the solution? Maybe it is imposible? But I have looked through > > wondershaper and I saw that there are source address filters. > > > > Please give me a hint. I am using kernel 2.4.20. > > > > Bye, > > Tadas > > > > _______________________________________________ > > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > > >
