[LARTC] Multi-Link Machine

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



G'day, I had a quick search through the archives to try and find an answer
but I have come up with a blank, so I'm hoping I can get a little help
here.

I have a linux machine with 2.4.19 on it, and 2 Internet links.

eth0 is Telstra Bigpond Cable (Semi static ip, its dhcp assigned), which I
want to route certain ips ranges over this link. 144.135.23.0/24 for eg.

eth1 is the internal interface on 192.168.0.0/24

eth2 is an adsl connection with a static ip which I want to be the default
route for any traffic left over.

I can get this to sort of work, but traceroute'ing to anything I set
static routes [1] with, doesn't work because I assume that it trys to come
back via the default route. Is that right?

Also I need to break the adsl connection into 2 parts, its a 512kbit link,
so I would like to take 384kbit and 128kbit of the link, and assign
128kbit to 192.168.0.192/27 which would be done on eth1, but I don't want
to limit traffic coming from eth0. (eth0 is 9mbit, so its a bit of a waste
to shape it down to 128kbit now isnt it :)

Is any of this possible or am I just dreaming?


[1] route add -net ip.add.re.ss netmask 255.255.255.255 gw <gw ip of eth0>

Thanks in advance.

Regards,

Brad Lay
(brad@xxxxxxxxxxxxx)



[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux