Re: [LARTC] CBQ to ASNs?

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

To: Jeff Warnica <jeffw@xxxxxxxxxxxxxx>
Subject: Re: [LARTC] CBQ to ASNs?
From: Martin Devera <devik@xxxxxx>
Date: Sun, 2 Dec 2001 16:58:54 +0100 (CET)
Cc: lartc@xxxxxxxxxxxxxxx
Delivered-to: lartc@outpost.powerdns.com
In-reply-to: <20011202054954.I24510@ron>
List-archive: <http://mailman.ds9a.nl/pipermail/lartc/>
List-help: <mailto:lartc-request@mailman.ds9a.nl?subject=help>
List-id: Linux Advanced Routing & Traffic Control list <lartc.mailman.ds9a.nl>
List-post: <mailto:lartc@mailman.ds9a.nl>
List-subscribe: <http://mailman.ds9a.nl/mailman/listinfo/lartc>,<mailto:lartc-request@mailman.ds9a.nl?subject=subscribe>
List-unsubscribe: <http://mailman.ds9a.nl/mailman/listinfo/lartc>,<mailto:lartc-request@mailman.ds9a.nl?subject=unsubscribe>
Sender: lartc-admin@xxxxxxxxxxxxxxx

> So: Can I do bandwidth management based on destination ASN?

not yet. Only IPs. You will need to fetch data from BGP and use
them to setup your qos filters.

I can't invent another way ..

devik

Follow-Ups:
- Re: [LARTC] CBQ to ASNs?
  - From: bert hubert

References:
- [LARTC] CBQ to ASNs?
  - From: Jeff Warnica

Prev by Date: Re: [LARTC] iproute2 and RTNETLINK error
Next by Date: [LARTC] Solved: Using more than 1 Internet Line
Previous by thread: [LARTC] CBQ to ASNs?
Next by thread: Re: [LARTC] CBQ to ASNs?
Index(es):
- Date
- Thread

[Index of Archives] [LARTC Home Page] [Netfilter] [Netfilter Development] [Network Development] [Bugtraq] [GCC Help] [Yosemite News] [Linux Kernel] [Fedora Users]

Powered by Linux