[LARTC] 1+1 HA gateway

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 Hi.

 I need to setup "one route" to a certain destination network (indeed
it's another LAN, which I want to connect to, i.e. I'm creating a
simple VPN). I have 2 possible gateways:
a) Fast (through an ADSL line via 192.168.7.254. This is a CIPE
connection)
b) Slow (through a RDSI line via 192.168.5.3. This is pure PPP)

 The situation I'm looking for is having two real routes to the
destination network (via the fast gateway and the slow one
respectively) but only the first (=fast) one is used in normal
conditions. The second (=slow) one will only be used in case the first
breaks (i.e. failover mode).

 I've tried to enter two different routes to the same destination and
it seems not to be permitted:

goliat:/etc/iproute2 # ip route list table roman
192.168.7.254 dev cipcb0  scope link 
default via 192.168.5.1 dev eth1 

goliat:/etc/iproute2 # ip route add 192.168.1.0/24 via 192.168.7.254
table roman

goliat:/etc/iproute2 # ip route add 192.168.1.0/24 via 192.168.5.3
table roman       
RTNETLINK answers: File exists
 
 Nevertheless I've checked the main table and I can see "duplicated"
routes (these were introduced by the "route" command):

goliat:/etc/iproute2 # ip route list
62.22.78.68 via 192.168.5.1 dev eth1 
62.22.78.68 via 192.168.5.2 dev eth1 
192.168.7.254 dev cipcb0  proto kernel  scope link  src 192.168.6.254 
192.168.5.0/24 dev eth1  proto kernel  scope link  src 192.168.5.200 
192.168.3.0/24 via 192.168.5.3 dev eth1 
192.168.2.0/24 via 192.168.5.3 dev eth1 
192.168.1.0/24 via 192.168.5.3 dev eth1 
192.168.0.0/24 dev eth0  proto kernel  scope link  src 192.168.0.200 
127.0.0.0/8 dev lo  scope link 
default via 192.168.5.1 dev eth1 
goliat:/etc/iproute2 # 

Note the 62.22.78.68 route. Now it is permitted !

 Is this last one a multipath route or what am I missing?

 Is it possible to reach the failover state I'm looking for? Any
experiences with that?

 Another possible case (perhaps it works) would be to set up a
multipath route and use a very high metric for the slow gateway, but
this is not exactly what I want 'cause I want the slow gateway to be
used IF and ONLY IF the fast one is down.

 Please, help. Thx in advance.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
    ** RoMaN SoFt / LLFB **  
       roman@xxxxxxxxxx
   http://pagina.de/romansoft
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux