"Nayak, Ramakrishna" wrote: > > I have enabled all the QoS features (except Special RSVP classifier for > IPv6) > Moreover, I had read in the archives that the advanced router options need > to be enabled. I have also enabled all of them. > > Any suggestions? are you sure eth1 is the correct interface? Nikolai > > ..Ram > > -----Original Message----- > From: Wingtung.Leung [mailto:s965817@xxxxxxxxxxxx] > Sent: Thursday, June 28, 2001 3:05 PM > To: Linux Advanced Router & Traffic Control > Subject: Re: [LARTC] tc errors > > On Thu, 28 Jun 2001, Nayak, Ramakrishna wrote: > > > tc qdisc add dev eth1 root handle 1: prio bands 3 priomap 0 1 2 > > > > I get the error message: > > > > RTNETLINK answers: No such file or directory. > > > > What causes this error? Am I missing anything in the kernel? > > Probably. Please check wether you have enabled all QoS parameters in the > current kernel. > > (This question comes up far to often, and I don't see it immediatly in the > HOWTO. Anyone to point me to it or fix it?) > > -- > GnuPG public key: http://www.keyserver.net > fingerprint = A3C4 DE50 712D 4FA8 C564 4D96 5E06 C9CC ECFA 19C5 > > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: > http://ds9a.nl/2.4Routing/ > > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
