> -----Original Message----- > From: Rodrigo Goya [mailto:rgoya@xxxxxxxxxxxxxxxxxx] > Sent: Friday, June 01, 2001 9:55 AM > To: Linux Advanced Router & Traffic Control > Subject: Re: [LARTC] qdisc unbounding question > > > Hi, > > > > tc class add dev eth0 parent 1:170 classid 1:30 cbq > bandwidth 200Kbit > > > rate 30Kbit weight 3Kbit prio 6 allot 1514 cell 8 > maxburst 20 avpkt 1000 > > > > Shouldn't the parent class be 1:1 instead of 1:170 ?? > > > > I believe in the current scheme, 1:170 is child from 1:1 > and 1:30 a child > > from 1:170. I think you want both 1:170 as 1:30 to be > children from 1:1. > > > > I agree with this. > > Also, shouldn't root qdisc 1:0 have full interface bandwidth? > and then root > class 1:1 have "bandwidth $TOTAL rate 200kbit bounded" ? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ < I'm throwing in the diagram again in for clarity > <---- 170kbs 170kbs ------------> if Dest. = 10.10.20.97 if Dest. = 10.10.30.3 (classid=170) (classid=171) |------| |------ | eth0 | |eth1 | | |-----| | -------- ------- <------30kbs 30kbs ---------------> if Dest. = 10.10.20.95 if Dest. = 10.10.30.2 (classid=30) (classid=31) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Ok.. I guess I could implement this. However, as it is now, I am effectively keeping the maximum bandwidth under 200kbs. So, I don't see a reason for it. Is there one? Let me clarify, I have been able to determine, through testing, that these seperate classes are indeed working. In other words, I am not able to exceed the bandwidth limitations set in their seperate classes. I.e. no more than 170kbs with dest ip= 10.10.20.97 AND no more than 30kbs if dest. ip = 10.10.20.95. Now, the only problem I'm having is having is to allow class 30 to borrow from it's parent class. > > Something else, isn't it necesary to have a qdisc for each > interface? Right now > it's 1:0 for eth0 and 1:0 for eth1, I don't know if this > works, I've always > done it using (for example) 1:0 for eth0 and 2:0 for eth1. > > If I'm off track please tell me =) Ok. This definetly makes sense. I set this up. so that there is a new qdisc classifier for each respective device 1:0 for eth0 2.0 for eth1 Unfortunately, I'm still back to square one. I Still can't seem to share between classes. Heres the latest revised output: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~ tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 200Kbit avpkt 1000 cell 8 tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 200Kbit rate 200Kbit weight 20Kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000 tc qdisc add dev eth1 root handle 2:0 cbq bandwidth 200Kbit avpkt 1000 cell 8 tc class add dev eth1 parent 2:0 classid 2:1 cbq bandwidth 200Kbit rate 200Kbit weight 20Kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000 tc class add dev eth0 parent 1:1 classid 1:170 cbq bandwidth 200Kbit rate 170Kbit weight 17Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 tc qdisc add dev eth0 parent 1:170 tbf rate 170Kbit buffer 10Kb/8 limit 15Kb mtu 1500 tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip dst 10.10.20.97 flowid 1:170 tc class add dev eth1 parent 2:1 classid 2:171 cbq bandwidth 200Kbit rate 170Kbit weight 17Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 tc qdisc add dev eth1 parent 2:171 tbf rate 170Kbit buffer 10Kb/8 limit 15Kb mtu 1500 tc filter add dev eth1 parent 2:0 protocol ip prio 100 u32 match ip dst 10.10.30.3 flowid 2:171 tc class add dev eth0 parent 1:1 classid 1:30 cbq bandwidth 200Kbit rate 30Kbit weight 3Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 tc qdisc add dev eth0 parent 1:30 tbf rate 30Kbit buffer 10Kb/8 limit 15Kb mtu 1500 tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip dst 10.10.20.95 flowid 1:30 tc class add dev eth1 parent 2:1 classid 2:31 cbq bandwidth 200Kbit rate 30Kbit weight 3Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 tc qdisc add dev eth1 parent 2:31 tbf rate 30Kbit buffer 10Kb/8 limit 15Kb mtu 1500 tc filter add dev eth1 parent 2:0 protocol ip prio 100 u32 match ip dst 10.10.30.2 flowid 2:31
