Hi Here is the architecture: I have 2 Internet connections router 1 -- eth0 | | eth1 | Linux | | Router | router 2 -- eth2 | | eth3 --- PC (66.60.1.3) Internet Connection: router 1 = 200.63.1.1 eth0 = 200.63.1.2 router 2 = 66.60.1.1 eth2 = 66.60.1.2 Lan Connection eth1 (NAT) = 192.168.200.0/24 192.168.201.0/24 192.168.202.0/24 eth3 (IP Aliasing) = 200.63.1.3, 200.63.1.4, 200.63.1.5 66.60.1.3, 66.60.1.4, 66.60.1.5 $ip rule 0: from all lookup local 32762: from 66.60.1.3 lookup 101 32763: from all to 66.60.1.3 lookup 100 32764: from 192.168.200.0/24 lookup 200 32765: from 192.168.100.0/24 lookup 300 32766: from all lookup main 32767: from all lookup 253 $ ip route 255.255.255.255 dev eth1 scope link (for DHCP) 200.63.1.0/24 dev eth0 proto kernel scope link src 200.63.1.2 192.168.200.0/24 dev eth1 proto kernel scope link src 192.168.200.254 192.168.201.0/24 dev eth1 proto kernel scope link src 192.168.201.254 192.168.202.0/24 dev eth1 proto kernel scope link src 192.168.202.254 66.60.1.0/24 dev eth2 proto kernel scope link src 66.60.1.2 127.0.0.0/8 dev lo scope link default via 66.60.1.1 dev eth2 (66.60.1.1 = router 2) $ ip route list table 300 192.168.200.0/24 via 192.168.200.254 dev eth1 192.168.201.0/24 via 192.168.201.254 dev eth1 192.168.202.0/24 via 192.168.202.254 dev eth1 default via 200.63.1.1 dev eth0 (200.63.1.1 = router $ ip route list table 200 192.168.200.0/24 via 192.168.200.254 dev eth1 192.168.202.0/24 via 192.168.202.254 dev eth1 default via 66.60.1.1 dev eth2 $ ip route list table 100 66.60.1.3 via 66.60.1.2 dev eth3 So far so good, but when I want to access the Internet with 66.60.1.3 (on eth3) I can't. But what I can do is ping any other machine on (192.168.200.0/24, 192.168.201.0/24, 192.168.202.0/24) from 66.60.1.3. So I did a rule from 66.60.1.3 like this and didn't work # ip route list table 101 200.63.1.1 via 200.63.1.2 dev eth0 66.60.1.1 via 66.60.1.2 dev eth2 default via 66.60.33.1 dev eth2 If you need any additional informational please tell me and I will send them OK so I almost got it but need to solve this problem any ideas? or is there another way of doing this? Thanks Krepper Guillermo
