[LARTC] urgent help needed in iproute2+tc

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,
I am running linux-2.4.0 with
3 interfaces - eth0, eth1, and eth2.

eth0 is the outgoing WAN interface.
eth1 and eth2 are the internal LAN interfaces.
eth1 and eth2 belong to a bridge group br0.
eth1 is connected to a voice-over-ip phone.
eth2 is connected to a pc.

so, the setup is
                      ------------------------------
	            |                             |
voip-phone --->| eth1  --->               |
	            |	  br0   eth0 -|---WAN
lan-pc ---------->| eth2 ---->               |
                      ------------------------------

voip-phone can talk with lan-pc
through-the-bridge-group.
voip phone can also talk with any other
phone in the outside-world-through-the-WAN.

I need to setup QoS so that all packets
from voip-phone (that is destined to either
eth1, eth2 or to eth0) are provided with
high-priority-low-delay service.  voip-phone
can be on any lan-interface (eth1 or eth2).
The only thing that can be surely said
about the voip-phone is that it will
have only a particular set of ip addresses
ranging from 171.72.233.100 to 171.72.233.200.

To implement this, i downloaded the
iproute2+tc tool version
iproute2-2.2.4-now-ss991023.tar.gz
and went through the README files.

Can somebody please help me in
writing the commands?  That will
be of great help.

Thanking you in advance,
ravi


---------------------------------------------------> Ravi Samprathi work:(408)853-8038 Cisco Systems res :(408)988-2268 Empowering the Internet Generation <---------------------------------------------------





[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux