Hi, take a look at this
TOPOLOGY:
+--------+ +--------+
| Linux | 202.1.1.1 | Cisco |
| Box |------------------| Router |--- INTERNET
+--------+ +--------+
|
+--------+
| Switch |
+--------+
| | | |
NAT(1) 192.168.101 | | | |
--------------------+ | | |
| | |
NAT(2) 192.168.102 | | |
----------------------+ | |
| |
NAT(3) 192.168.103 | |
------------------------+ |
|
NAT(4) 192.168.104 |
--------------------------+
The linux box should do:
- act as Router
- NAT 1,2,3,4. In NATs segment I may have public IP (202.1.1.15)
- Traffic control from 32kb to 512kb based on IP address
Each NAT will have in the future about 100-200 hosts.
NOTE: this is for a wireless network so maybe the switch could be
replaced for some wireless cards on the linux box.
I DONT WANT YOU TO DO IT FORE ME !!! Just need to know:
if it is possible to do it with iproute2?
based on yours experience witch are the best or recomended applications to use or combine?
if there are some problems or recomandations I must have to take.
is NAT the solution or is there other options?
Any other advice?
thanks very much
