I'd like to setup cbq for my 7 lan users, but i'd like to do it only for the internet connect (LAN is accessing internet through masquerading), not for the whole server machine: i mean somebody on the lan should access the server at full rate(10Mbit/s), but internet at for example 30KB/sec).
i now i've setup only kbits, but those dramastic low-speed was to see easily if it was working or not :)
how could i do that?
my lan NIC is eth0 and internet eth1, i already tried the following thingie that doesn't work (i suppose it's logic, but i had to try it ;) )
And, How could i reset all the cbq existing config to remake a new one?
tc qdisc add dev eth1 root handle 10: cbq bandwidth 105Kbit avpkt 1000 tc class add dev eth1 parent 10:0 classid 10:1 cbq bandwidth 105Kbit rate \ 105Kbit allot 1514 weight 15Kbit prio 8 maxburst 20 avpkt 1000
tc class add dev eth1 parent 10:1 classid 10:100 cbq bandwidth 105Kbit rate \
10Kbit allot 1514 weight 5Kbit prio 5 maxburst 20 avpkt 1000 bounded
tc qdisc add dev eth1 parent 10:100 sfq quantum 1514b perturb 15 tc qdisc add dev eth1 parent 10:200 sfq quantum 1514b perturb 15
tc filter add dev eth1 parent 10:0 protocol ip prio 25 u32 match ip dst \ 192.168.0.0/16 flowid 10:100
Same kind of thing for upstream
PS: where could i find a decent doc/faq/howto about cbq? Advanced-routing isn't that bad but it's far from explaining every little trick :/
Greetings, JY _____________________________________________________________________________________ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
