I have spent a tremendous amount of time on this one, and I can reproduce it. I set up all of my classes and queues. Now is time for the filters. Let's say that I have a flowid 1:100 which is the handle of a queue with a very small bounded isolated bandwidth allocation of 25Kbit. If I use the following filter: tc filter add dev eth1 parent 1:0 protocol ip prio 25 u32 match ip src 216.79.164.46 flowid 1:100 I get the correct throughtput of 25Kbit. However, if I attempt to filter by protocol instead, it does not work. I will disregard the fact that this filter will manipulate both TCP and UDP sessions destined to the specific port. I am attaching to a server on port 8080 (0x1f90). tc filter add dev eth1 parent 1:0 protocol ip prio 25 u32 match tcp src 0x1f90 0xffff flowid 1:100 A connection to the above port will yield the default bandwidth of 10Mbit. Not the desired effect. I have used many examples copied strainght out of the sources, in all of them, the IP address matching works, but the TCP matching never does. Any help is greatly appreciated. Peter Frischknecht Empowering Solutions, Inc. http://www.empoweringsolutions.com (864)654.6544 x103 Phone (864)654.0022 Fax
