On Wed, Oct 18, 2000 at 09:34:30AM +0200, Fredrik Rambris wrote: > Daniel Bergqvist wrote: > > > > It works fine for me. Have you compiled the kernel with all QoS settings on? > > Darn. I forgot the u32 rate esitmator... it works fine now. One thing > that the HOWTO doesn't really tell is if the upstream and downstream is > 128kbit+128kbit or 128kbit/128kbit (they share the same bandwidth). It does tell you. Unless you use the ingress policer, you only limit *outgoing* data on an interface. So if you want to limit both up and downstream, you need 2 interfaces, and 2 sets of rules. You can also use the ingress policer but that's a bit after the fact, as the HOWTO says 'like throwing away half the letters you receive, in the hope that people will stop sending you them'. Regards, bert hubert > > > > > -----Ursprungligt meddelande----- > > > Från: boost@xxxxxxxxxxxxxxxxxxxxxxxx > > > [mailto:boost@xxxxxxxxxxxxxxxxxxxxxxxx]För Fredrik Rambris > > > > > > tc qdisc add dev eth0 root handle 10: cbq bandwidth 100Mbit avpkt 1000 > > > > > > tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 10Mbit \ > > > rate 100Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 > > > > > > tc class add dev eth0 parent 10:1 classid 10:100 cbq bandwidth 100Mbit \ > > > rate 128kbit allot 1514 weight 80Kbit prio 5 maxburst 20 avpkt 1000 \ > > > bounded > > > > > > tc qdisc add dev eth0 parent 10:100 sfq quantum 1514b perturb 15 > > > > > > tc filter add dev eth0 parent 10:0 protocol ip prio 100 u32 match ip \ > > > dst 192.168.3.0/24 flowid 10:100 > > > > _______________________________________________ > > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/ > > -- > Admera Solution Provider AB > Tel: 0733-850 814 > Position: 55°36´13N 13°03´36E Content-Description: Card for Fredrik Rambris -- PowerDNS Versatile DNS Services Trilab The Technology People 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet
