On Monday 13 January 2003 15:06, Rohit Talukdar wrote: > 1. am a newbie in traffic shaping . > was going thru http://www.docum.org/stef.coene/qos/faq/#2 > Under the para titled > "Basic rules for traffic shaping with HTB" > > there is this line that reads: > So 10, 200 and 300 are leaf classes = they have no child classes. And class > 1 has a maximum of 100 due to the link limitation. So it really can't use > more then 100. > > pardon me if i am wrong, but shouldnt (after looking at the figure) > 20, 200 and 300 be the leaf classes instead of 10, 200 and 300. > ( really apreciate the yeoman service rendered by stef coene in > enlightening newbies like me) Yep. Corrected. > 2. also, > [root@xyz root]# ip link list > 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc cbq qlen 100 > link/ether 00:80:ad:77:6b:46 brd ff:ff:ff:ff:ff:ff > [root@xyz root]# ip rule list > 0: from all lookup local > 32766: from all lookup main > 32767: from all lookup 253 > > after adding the rules (using tc), what command should i use the list all > the rules tc -s -d class show dev eth0 tc -s -d filter show dev eth0 tc -s -d qdisc show dev eth0 Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net
