1. am a newbie in traffic shaping . was going thru http://www.docum.org/stef.coene/qos/faq/#2 Under the para titled "Basic rules for traffic shaping with HTB" there is this line that reads: So 10, 200 and 300 are leaf classes = they have no child classes. And class 1 has a maximum of 100 due to the link limitation. So it really can't use more then 100. pardon me if i am wrong, but shouldnt (after looking at the figure) 20, 200 and 300 be the leaf classes instead of 10, 200 and 300. ( really apreciate the yeoman service rendered by stef coene in enlightening newbies like me) 2. also, [root@xyz root]# ip link list 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc cbq qlen 100 link/ether 00:80:ad:77:6b:46 brd ff:ff:ff:ff:ff:ff [root@xyz root]# ip rule list 0: from all lookup local 32766: from all lookup main 32767: from all lookup 253 after adding the rules (using tc), what command should i use the list all the rules thanks in advance nerd
