Hello I have 2 network cards and i will use those in the same network. eth0 is 100Mbit and eth1 is 1000Mbit. But eth1 is not always connected to the network. The ip from bouth network cards is 192.168.0.20 . I need routing balancing but i have no idea how can i do this. And if one of the both network cards are not connected 100% of the traffic must go over the other card. Anyone a idea? _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
