I'm trying to setup traffic shaping for a customer. Machine is RedHat 7.3 with kernel-smp-2.4.18-18.7.x. HZ=512. But when I try to load link (using netcat and discard / chargen services) bytes count (tc -s qdisc show, sfq qdisc) goes quite well over 512kbit (~560kbit). With UDP I can even go over 1mbit. What can be done to ensure tighter limits? Thanks, Mindaugas burst and cburst were set by tc and equals 2175b. r2q = 10. No more tc rules exists now. $TC qdisc del dev eth0 root $TC qdisc del dev eth1 root $TC qdisc add dev eth0 root handle 1: htb $TC qdisc add dev eth1 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:200 htb rate 512kbit $TC class add dev eth1 parent 1: classid 1:200 htb rate 512kbit $TC qdisc add dev eth0 parent 1:200 handle 200: sfq perturb 10 $TC qdisc add dev eth1 parent 1:200 handle 200: sfq perturb 10 $TC filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip src $ip flowid 1:200 $TC filter add dev eth1 parent 1: protocol ip prio 1 u32 match ip dst $ip flowid 1:200 _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
