On Mon, 9 Dec 2002, Vladimir Smelhaus wrote:
> On 9 Dec 2002, 15:52, Thomas Jalsovsky wrote:
>
> > I have HTB on IMQ device. My rate does not work as I configured. I
> > configured 1920kbit/s and I can download only about 290kbit/s (while
>
> Set your pfifo limit higher. You have too much dropped packets.
>
> > class htb 1:10 parent 1:1 leaf 10: prio 0 quantum 9011 rate 704Kbit
> > ceil 1920Kbit burst 2500b/8 mpu 0b cburst 4056b/8 mpu 0b level 0
> > Sent 8642235 bytes 8393 pkts (dropped 2153, overlimits 0)
> > rate 36918bps 36pps
> > lended: 3618 borrowed: 4775 giants: 0
I have:
ifconfig imq0
imq0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP RUNNING NOARP MTU:1500 Metric:1
RX packets:821349 errors:0 dropped:0 overruns:0 frame:0
TX packets:723509 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:30
RX bytes:456249915 (435.1 Mb) TX bytes:391405155 (373.2 Mb)
Which value if txqueuelen should be good for me? Or you though for
anything else (in lartc pfifo limit is txqueuelen..)
Thanks,
Thomas
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
