Martin A. Brown wrote:
Luis,
<speculation mode on>
: Then, I went to /etc/sysconfig and I created a file called static-routes : with this content:
: advanced eth1 194.149.216.1/32 dev vlan2 table 21
: advanced eth1 194.149.216.2/32 dev vlan2 table 21
: advanced eth1 194.149.216.3/32 dev vlan2 table 21
: advanced eth1 0.0.0.0/0 via 10.1.0.254 table 20
:
: Why table 21 is not loaded at boot?
: :(
is the vlan2 device up when these networking scripts are called? If I had to guess, I'd say they are not.....hard to add a route through a device that isn't there!
<speculation mode off>
-Martin
_______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/