well, not really actually. i tried with iptables version 1.2.7a (the latest at the time) but the compile didnt succeed on the 2.4.5, though it did on a 2.4.18 (another box). i have now upgraded the kernel to 2.4.19 and the iptables installation worked, though im having _really_ big problems with getting a new version (1.99) of freeswan to work correct. i have compiled freeswan into the kernel, but the err msgs i get when trying to start it claims that my kernel do not have KLIPS and cant locate the modules 'ipsec'. if you have _any_ idea, please tell me. thanks tomas bonnedahl On Fri, Nov 22, 2002 at 06:20:48PM -0200, Ethy H. Brito wrote: > On 15 Nov 2002, Vincent Jaussaud wrote: > > > Hi tomas, > > > > On Wed, 2002-11-13 at 13:34, Tomas Bonnedahl wrote: > > > i have a setup that looks like this > > > > > > LAN <--> router <--> fw <--> internet > > > > > > both the router and the fw is slackware with 2.4.5, the fw also has > > > ipsec tunnels using the freeswan software. > > > > > > the problem is that the fw is continuously hanging when sending too large > > > packets through the tunnel, even a frame over 1400 bytes gets the fw to hang. > > > (which it shouldnt, 40 bytes overhead for the ip and tcp header, and perhaps 20 > > > bytes for the ESP header). > > Did you have success solving this? > > Regards > > Ethy H. Brito /"\ > InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML > +55 (12) 3941-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL > S.J.Campos - Brasil / \ > > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
