failed shaping outgoing traffic

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




I used cbq in my gateway,
eth1 connecting to internet, and eth0 to local network,
to poll traffic in/out using ipchains accounting and mrtg.
Now i have succeed shaping incoming traffic to my local
network with my configuration using cbq on eth0, but
when i try to shaping outgoing traffic from my local
network i see it didn't workout from my mrtg.
RULE=10.111.1.2 (for incoming)
RULE=10.111.1.2, (for outgoing)
Any body have an idea to solve this ?


      Best regards,    
>--<Kristiadi Himawan>--<

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux