how can i choose HTB's prio

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



HTB and imq was used to control traffic.
AC="tc class add dev eth0 parent"
$AC 1: classid 1:1 htb rate 100kbps burst 2k
$AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps
burst 2k prio 1
$AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps
burst 2k prio 2
$AC 1:2 classid 1:12 htb rate 50kbps ceil 100kbps
burst 2k 
please tell me if i do not set prio, what is the
default prio? low delay class can use prio 2,the
others should use which prio?




_________________________________________________________
Do You Yahoo!? 
"发短信赢手机,快来参加雅虎巨星秀!"
http://cn.ent.yahoo.com/star/midautumn/index.html
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux