|
Hi
I have two lucent wlancards and one 3com ethernet
card running on my box.
I'm running routing tables with iproute2 in order
to route all the packets correctly ... Now I wonder, I should be able to use
wondershaper on top of this, right?
When I try to run wondershaper, it does nothing,
and gives me lots of error messages ...
The beginning of them are quoted here (output with
-x activated in the beginning of the script):
+ DOWNLINK=1024
+ UPLINK=1024 + DEV=eth1 + NOPRIOHOSTSRC=80 + NOPRIOHOSTDST= + NOPRIOPORTSRC= + NOPRIOPORTDST= + '[' '' = status ']' + tc qdisc del dev eth1 root + tc qdisc del dev eth1 ingress + '[' '' = stop ']' + tc qdisc add dev eth1 root handle 1: cbq avpkt 1000 bandwidth 10mbit RTNETLINK answers: Invalid argument + tc class add dev eth1 parent 1: classid 1:1 cbq rate 1024kbit allot 1500 prio 5 bounded isolated RTNETLINK answers: Invalid argument + tc class add dev eth1 parent 1:1 classid 1:10 cbq rate 1024kbit allot 1600 prio 1 avpkt 1000 RTNETLINK answers: Invalid argument + tc class add dev eth1 parent 1:1 classid 1:20 cbq rate 921kbit allot 1600 prio 2 avpkt 1000 RTNETLINK answers: Invalid argument + tc class add dev eth1 parent 1:1 classid 1:30 cbq rate 819kbit allot 1600 prio 2 avpkt 1000 RTNETLINK answers: Invalid argument and so it continues on every single command-line
wondershaper tried to type in.
anybody have a clue, I would be
grateful
/Snowi3
|
