hi. Alexey Talikov wrote: >This question mainly for Patrick McHardy >As I understand problem about IMQ and GRE all been working fine, if I send packets from tunnel >to another IMQ. I'm right ? > right. the problem is when sending packets to a device which encapsulates them and both the non-encapsulated and the encapsulated go to the same imq device. > > >My configuration >eth2 - main link >ppp0 - PPTP (tcp control connection on port 1723-over eth2 and GRE tunnel ppp0 ) >I'm not sure that only GRE packets flowing through ppp0, can somebody corect me if not so ? > >modprobe imq numdevs=2 >..... ( queue config for imq0 and imq1 ) >iptables -t mangle -A PREROUTING -i eth2 -j IMQ --todev 0 >iptables -t mangle -A PREROUTING -i ppp0 -j IMQ --todev 1 >ip link set imq0 up >ip link set imq1 up > >Thank for any answer !! >----------------------------------- >mailto:alexey_talikov@texlab.com.uz >BR >Alexey Talikov >FORTEK >----------------------------------- > hmm sorry i don't really get your configuration. gre tunnel is going through ppp0 which is pptp over eth2 ? you can just try out if it works, your computer won't crash if it doesn't. you'll see some messages about imq beeing deadlooped in the ringbuffer if it doesn't ... Bye Patrick _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
