> Hi, > > I'm trying to test RIP but I have some problems: > > 1. I connect two linux boxes running zebra and ripd, with a cross > ethernet cable. > > looking at the sniffer (ethereal) all seems to go well, because I > can see both boxes sending the Ripv2 response message in broadcast > and receiving them. The fact is that on both the ripd.conf file I put the > command "redistribute kernel" but only one box updates its routing > table. Why the other box doesn't? > > 2. Substituting one of the linux boxes with a cisco2600 router, things > get worst. The cisco router send a ripv2 request packet and then > continues to send CDP packets without redistributing its static routes. > Does anybady know a simple configuration for the cisco2600 rip? On > cisco web siteI found all but this. > > my zebra.conf: > > hostname Router-A > password zebra > enable password zebra > interface lo > description Router-A loopback > ip route 0.0.0.0/0 192.168.100.1 > log file zebra.log > > my ripd.conf > > hostname ripd-r1 > password zebra > router rip > network 192.168.100.0/24 > redistribute kernel > log stdout > > my cisco configuration > > router rip > version 2 > network 192.168.100.0 > redistribute static > > Many thanks for help, > > Luca Andreani _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
