Hi Martin. Thanks for your reply.
On Sat, 2002-02-02 at 08:14, Martin Devera wrote:
> filter design in Linux QoS but I can't do anything with it.
> Simply add prio 1 to the class definition (last tc line above).
> And let me know ! ;)
In fact, there is no change. Here is my current configuration, with the
changes you suggested:
tc class add dev eth8 parent 1: classid 1:1 htb rate 250kbps
tc class add dev eth8 parent 1:1 classid 1:10 htb rate 200kbps \
ceil 250kbps burst 10k prio 1
tc qdisc add dev eth8 parent 1:10 sfq perturb 5
tc filter add dev eth8 protocol ip parent 1: u32 match ip \
src 199.212.53.0/24 flowid 1:10
tc class add dev eth8 parent 1:1 classid 1:11 htb rate 50kbps \
ceil 200kbps burst 2k prio 4
tc qdisc add dev eth8 parent 1:11 sfq perturb 5
tc filter add dev eth8 protocol ip parent 1: u32 match ip \
src 199.212.55.128/25 flowid 1:11
Monitoring eth8, I see it sending out at 200k/s, all traffic generated
from 199.212.55.128/25. This is what I'd expect. When I hit the
webserver (on 199.212.53.0/24) hard, eth8 begins to send at 250k/s (it
is a 2Mbit uplink), but the portion of that from the webserver is only
about 50-90/s, not 200k/s like I'd expect based on id 1:10.
Any other thoughts?
Regards,
Jason.
--
Academic Computing Support Specialist
Algoma University College
Sault Ste. Marie, Ontario
705-949-2301 x330 Personal Home Page
http://www.auc.ca http://sault.org
