Re: [RFC PATCH v3 1/2] add support for Hyper-V reference time counter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08.01.2014 11:44, Vadim Rozenfeld wrote:
On Wed, 2014-01-08 at 11:15 +0100, Peter Lieven wrote:
On 08.01.2014 10:40, Vadim Rozenfeld wrote:
On Tue, 2014-01-07 at 18:52 +0100, Peter Lieven wrote:
Am 07.01.2014 10:36, schrieb Vadim Rozenfeld:
On Thu, 2014-01-02 at 17:52 +0100, Peter Lieven wrote:
Am 11.12.2013 19:59, schrieb Marcelo Tosatti:
On Wed, Dec 11, 2013 at 04:53:05PM -0200, Marcelo Tosatti wrote:
On Sun, Dec 08, 2013 at 10:33:38PM +1100, Vadim Rozenfeld wrote:
Signed-off: Peter Lieven <pl@xxxxxxx>
Signed-off: Gleb Natapov <gleb@xxxxxxxxxx>
Signed-off: Vadim Rozenfeld <vrozenfe@xxxxxxxxxx>

v1 -> v2
1. mark TSC page dirty as suggested by
      Eric Northup <digitaleric@xxxxxxxxxx> and Gleb
2. disable local irq when calling get_kernel_ns,
      as it was done by Peter Lieven <pl@xxxxxxxxx>
3. move check for TSC page enable from second patch
      to this one.

---
   arch/x86/include/asm/kvm_host.h    |  2 ++
   arch/x86/include/uapi/asm/hyperv.h | 13 +++++++++++++
   arch/x86/kvm/x86.c                 | 39 +++++++++++++++++++++++++++++++++++++-
   include/uapi/linux/kvm.h           |  1 +
   4 files changed, 54 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index ae5d783..2fd0753 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -605,6 +605,8 @@ struct kvm_arch {
   	/* fields used by HYPER-V emulation */
   	u64 hv_guest_os_id;
   	u64 hv_hypercall;
+	u64 hv_ref_count;
+	u64 hv_tsc_page;

   	#ifdef CONFIG_KVM_MMU_AUDIT
   	int audit_point;
diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h
index b8f1c01..462efe7 100644
--- a/arch/x86/include/uapi/asm/hyperv.h
+++ b/arch/x86/include/uapi/asm/hyperv.h
@@ -28,6 +28,9 @@
   /* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/
   #define HV_X64_MSR_TIME_REF_COUNT_AVAILABLE	(1 << 1)

+/* A partition's reference time stamp counter (TSC) page */
+#define HV_X64_MSR_REFERENCE_TSC		0x40000021
+
   /*
    * There is a single feature flag that signifies the presence of the MSR
    * that can be used to retrieve both the local APIC Timer frequency as
@@ -198,6 +201,9 @@
   #define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_MASK	\
   		(~((1ull << HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT) - 1))

+#define HV_X64_MSR_TSC_REFERENCE_ENABLE		0x00000001
+#define HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT	12
+
   #define HV_PROCESSOR_POWER_STATE_C0		0
   #define HV_PROCESSOR_POWER_STATE_C1		1
   #define HV_PROCESSOR_POWER_STATE_C2		2
@@ -210,4 +216,11 @@
   #define HV_STATUS_INVALID_ALIGNMENT		4
   #define HV_STATUS_INSUFFICIENT_BUFFERS		19

+typedef struct _HV_REFERENCE_TSC_PAGE {
+	__u32 tsc_sequence;
+	__u32 res1;
+	__u64 tsc_scale;
+	__s64 tsc_offset;
+} HV_REFERENCE_TSC_PAGE, *PHV_REFERENCE_TSC_PAGE;
+
   #endif
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 21ef1ba..5e4e495a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -840,7 +840,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc);
   static u32 msrs_to_save[] = {
   	MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
   	MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW,
-	HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,
+	HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL, HV_X64_MSR_TIME_REF_COUNT,
   	HV_X64_MSR_APIC_ASSIST_PAGE, MSR_KVM_ASYNC_PF_EN, MSR_KVM_STEAL_TIME,
   	MSR_KVM_PV_EOI_EN,
   	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
@@ -1826,6 +1826,8 @@ static bool kvm_hv_msr_partition_wide(u32 msr)
   	switch (msr) {
   	case HV_X64_MSR_GUEST_OS_ID:
   	case HV_X64_MSR_HYPERCALL:
+	case HV_X64_MSR_REFERENCE_TSC:
+	case HV_X64_MSR_TIME_REF_COUNT:
   		r = true;
   		break;
   	}
@@ -1865,6 +1867,29 @@ static int set_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data)
   		if (__copy_to_user((void __user *)addr, instructions, 4))
   			return 1;
   		kvm->arch.hv_hypercall = data;
+		local_irq_disable();
+		kvm->arch.hv_ref_count = get_kernel_ns() + kvm->arch.kvmclock_offset;
+		local_irq_enable();

Where does the docs say that HV_X64_MSR_HYPERCALL is the where the clock
starts counting?

No need to store kvmclock_offset in hv_ref_count? (moreover
the name is weird, better name would be "hv_ref_start_time".

Just add kvmclock_offset when reading the values (otherwise you have a
"stale copy" of kvmclock_offset in hv_ref_count).


After some experiments I think we do no need kvm->arch.hv_ref_count at all.

I was debugging some weird clockjump issues and I think the problem is that after live migration
kvm->arch.hv_ref_count is initialized to 0. Depending on the uptime of the vServer when the
hypercall was set up this can lead to series jumps.

So I would suggest to completely drop kvm->arch.hv_ref_count.

And use simply this in get_msr_hyperv_pw().

          case HV_X64_MSR_TIME_REF_COUNT: {
                  data = div_u64(get_kernel_ns() + kvm->arch.kvmclock_offset, 100);
                  break;
          }


Agreed. It should work as long as we rely on kvmclock_offset.
Vadim.

I think we can rely on kvmclock_offset. Had you had a chance to do further testing
during the weekend?

Yes, and still testing.

There is still some inconsistency in the value returned by
QueryPerformanceCounter during migration.

With my proposal?


Right.
Please see below QTC vs. NTP time stamp
before and after migration:

C:\timedrift\objchk_win7_x86\i386>timedrift.exe
quantum = 15
QPC     NTP     Delta
1311    1307    4
2621    2618    3
3932    3931    1
.......
.......
38018   38014   4
Unable to wait for NTP reply from the SNTP server, GetLastError returns
7279088
142210  40113   102097
143458  41357   102101
.......
.......
156500  54615   101885

NTP time changed from  38014 to 40113 ((40113 - 38014) / 100 = 21 mSec)
while QPC jumped from  38018 to 142210 ((142210 - 38014) / 100 = 1042
mSec)

How long was the downtime when you migrated the vServer?

I have done similar tests and have not seen this...
Can you show the relevant parts of your patch. Remember I use the REFERENCE_COUTNER not iTSC.

Peter

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux