On Sun, Dec 08, 2013 at 10:33:38PM +1100, Vadim Rozenfeld wrote:
> Signed-off: Peter Lieven <pl@xxxxxxx>
> Signed-off: Gleb Natapov <gleb@xxxxxxxxxx>
> Signed-off: Vadim Rozenfeld <vrozenfe@xxxxxxxxxx>
>
> v1 -> v2
> 1. mark TSC page dirty as suggested by
> Eric Northup <digitaleric@xxxxxxxxxx> and Gleb
> 2. disable local irq when calling get_kernel_ns,
> as it was done by Peter Lieven <pl@xxxxxxxxx>
> 3. move check for TSC page enable from second patch
> to this one.
>
> ---
> arch/x86/include/asm/kvm_host.h | 2 ++
> arch/x86/include/uapi/asm/hyperv.h | 13 +++++++++++++
> arch/x86/kvm/x86.c | 39 +++++++++++++++++++++++++++++++++++++-
> include/uapi/linux/kvm.h | 1 +
> 4 files changed, 54 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index ae5d783..2fd0753 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -605,6 +605,8 @@ struct kvm_arch {
> /* fields used by HYPER-V emulation */
> u64 hv_guest_os_id;
> u64 hv_hypercall;
> + u64 hv_ref_count;
> + u64 hv_tsc_page;
>
> #ifdef CONFIG_KVM_MMU_AUDIT
> int audit_point;
> diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h
> index b8f1c01..462efe7 100644
> --- a/arch/x86/include/uapi/asm/hyperv.h
> +++ b/arch/x86/include/uapi/asm/hyperv.h
> @@ -28,6 +28,9 @@
> /* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/
> #define HV_X64_MSR_TIME_REF_COUNT_AVAILABLE (1 << 1)
>
> +/* A partition's reference time stamp counter (TSC) page */
> +#define HV_X64_MSR_REFERENCE_TSC 0x40000021
> +
> /*
> * There is a single feature flag that signifies the presence of the MSR
> * that can be used to retrieve both the local APIC Timer frequency as
> @@ -198,6 +201,9 @@
> #define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_MASK \
> (~((1ull << HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT) - 1))
>
> +#define HV_X64_MSR_TSC_REFERENCE_ENABLE 0x00000001
> +#define HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT 12
> +
> #define HV_PROCESSOR_POWER_STATE_C0 0
> #define HV_PROCESSOR_POWER_STATE_C1 1
> #define HV_PROCESSOR_POWER_STATE_C2 2
> @@ -210,4 +216,11 @@
> #define HV_STATUS_INVALID_ALIGNMENT 4
> #define HV_STATUS_INSUFFICIENT_BUFFERS 19
>
> +typedef struct _HV_REFERENCE_TSC_PAGE {
> + __u32 tsc_sequence;
> + __u32 res1;
> + __u64 tsc_scale;
> + __s64 tsc_offset;
> +} HV_REFERENCE_TSC_PAGE, *PHV_REFERENCE_TSC_PAGE;
> +
> #endif
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 21ef1ba..5e4e495a 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -840,7 +840,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc);
> static u32 msrs_to_save[] = {
> MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
> MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW,
> - HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,
> + HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL, HV_X64_MSR_TIME_REF_COUNT,
> HV_X64_MSR_APIC_ASSIST_PAGE, MSR_KVM_ASYNC_PF_EN, MSR_KVM_STEAL_TIME,
> MSR_KVM_PV_EOI_EN,
> MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
> @@ -1826,6 +1826,8 @@ static bool kvm_hv_msr_partition_wide(u32 msr)
> switch (msr) {
> case HV_X64_MSR_GUEST_OS_ID:
> case HV_X64_MSR_HYPERCALL:
> + case HV_X64_MSR_REFERENCE_TSC:
> + case HV_X64_MSR_TIME_REF_COUNT:
> r = true;
> break;
> }
> @@ -1865,6 +1867,29 @@ static int set_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data)
> if (__copy_to_user((void __user *)addr, instructions, 4))
> return 1;
> kvm->arch.hv_hypercall = data;
> + local_irq_disable();
> + kvm->arch.hv_ref_count = get_kernel_ns() + kvm->arch.kvmclock_offset;
> + local_irq_enable();
Where does the docs say that HV_X64_MSR_HYPERCALL is the where the clock
starts counting?
No need to store kvmclock_offset in hv_ref_count? (moreover
the name is weird, better name would be "hv_ref_start_time".
> + break;
> + }
> + case HV_X64_MSR_REFERENCE_TSC: {
> + u64 gfn;
> + unsigned long addr;
> + HV_REFERENCE_TSC_PAGE tsc_ref;
> + tsc_ref.tsc_sequence = 0;
> + if (!(data & HV_X64_MSR_TSC_REFERENCE_ENABLE)) {
> + kvm->arch.hv_tsc_page = data;
> + break;
> + }
> + gfn = data >> HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT;
> + addr = gfn_to_hva(kvm, data >>
> + HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT);
> + if (kvm_is_error_hva(addr))
> + return 1;
> + if (__copy_to_user((void __user *)addr, &tsc_ref, sizeof(tsc_ref)))
> + return 1;
> + mark_page_dirty(kvm, gfn);
> + kvm->arch.hv_tsc_page = data;
> break;
> }
> default:
> @@ -2291,6 +2316,17 @@ static int get_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
> case HV_X64_MSR_HYPERCALL:
> data = kvm->arch.hv_hypercall;
> break;
> + case HV_X64_MSR_TIME_REF_COUNT: {
> + u64 now_ns;
> + local_irq_disable();
> + now_ns = get_kernel_ns() + kvm->arch.kvmclock_offset;
> + data = div_u64(now_ns - kvm->arch.hv_ref_count, 100);
> + local_irq_enable();
No need for irq disable/enable pairs.
> + break;
> + }
> + case HV_X64_MSR_REFERENCE_TSC:
> + data = kvm->arch.hv_tsc_page;
> + break;
Does it return non-zero data even if not enabled?
> default:
> vcpu_unimpl(vcpu, "Hyper-V unhandled rdmsr: 0x%x\n", msr);
> return 1;
> @@ -2605,6 +2641,7 @@ int kvm_dev_ioctl_check_extension(long ext)
> case KVM_CAP_ASSIGN_DEV_IRQ:
> case KVM_CAP_PCI_2_3:
> #endif
> + case KVM_CAP_HYPERV_TIME:
> r = 1;
> break;
> case KVM_CAP_COALESCED_MMIO:
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index 902f124..686c1ca 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -674,6 +674,7 @@ struct kvm_ppc_smmu_info {
> #define KVM_CAP_ARM_EL1_32BIT 93
> #define KVM_CAP_SPAPR_MULTITCE 94
> #define KVM_CAP_EXT_EMUL_CPUID 95
> +#define KVM_CAP_HYPERV_TIME 96
>
> #ifdef KVM_CAP_IRQ_ROUTING
>
> --
> 1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
