>>> The QEMU command line (/var/log/libvirt/qemu/[domain name].log),
>>> LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/
>>> QEMU_AUDIO_DRV=none
>>> /usr/local/bin/qemu-system-x86_64 -name ATS1 -S -M pc-0.12 -cpu
>>> qemu32 -enable-kvm -m 12288 -smp 4,sockets=4,cores=1,threads=1 -uuid
>>> 0505ec91-382d-800e-2c79-e5b286eb60b5 -no-user-config -nodefaults
>>> -chardev
>>> socket,id=charmonitor,path=/var/lib/libvirt/qemu/ATS1.monitor,server,
>>> n owait -mon chardev=charmonitor,id=monitor,mode=control -rtc
>>> base=localtime -no-shutdown -device
>>> piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive
>>> file=/opt/ne/vm/ATS1.img,if=none,id=drive-virtio-disk0,format=raw,cac
>>> h
>>> e=none -device
>>> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x8,drive=drive-virtio-disk0,i
>>> d
>>> =virtio-disk0,bootindex=1 -netdev
>>> tap,fd=20,id=hostnet0,vhost=on,vhostfd=21 -device
>>> virtio-net-pci,netdev=hostnet0,id=net0,mac=00:e0:fc:00:0f:00,bus=pci.
>>> 0
>>> ,addr=0x3,bootindex=2 -netdev
>>> tap,fd=22,id=hostnet1,vhost=on,vhostfd=23 -device
>>> virtio-net-pci,netdev=hostnet1,id=net1,mac=00:e0:fc:01:0f:00,bus=pci.
>>> 0
>>> ,addr=0x4 -netdev tap,fd=24,id=hostnet2,vhost=on,vhostfd=25 -device
>>> virtio-net-pci,netdev=hostnet2,id=net2,mac=00:e0:fc:02:0f:00,bus=pci.
>>> 0
>>> ,addr=0x5 -netdev tap,fd=26,id=hostnet3,vhost=on,vhostfd=27 -device
>>> virtio-net-pci,netdev=hostnet3,id=net3,mac=00:e0:fc:03:0f:00,bus=pci.
>>> 0
>>> ,addr=0x6 -netdev tap,fd=28,id=hostnet4,vhost=on,vhostfd=29 -device
>>> virtio-net-pci,netdev=hostnet4,id=net4,mac=00:e0:fc:0a:0f:00,bus=pci.
>>> 0
>>> ,addr=0x7 -netdev tap,fd=30,id=hostnet5,vhost=on,vhostfd=31 -device
>>> virtio-net-pci,netdev=hostnet5,id=net5,mac=00:e0:fc:0b:0f:00,bus=pci.
>>> 0
>>> ,addr=0x9 -chardev pty,id=charserial0 -device
>>> isa-serial,chardev=charserial0,id=serial0 -vnc *:0 -k en-us -vga
>>> cirrus -device i6300esb,id=watchdog0,bus=pci.0,addr=0xb
>>> -watchdog-action poweroff -device
>>> virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xa
>>>
>>Which QEMU version is this? Can you try with e1000 NICs instead of virtio?
>>
>This QEMU version is 1.0.0, but I also test QEMU 1.5.2, the same problem exists, including the performance degradation and readonly GFNs' flooding.
>I tried with e1000 NICs instead of virtio, including the performance degradation and readonly GFNs' flooding, the QEMU version is 1.5.2.
>No matter e1000 NICs or virtio NICs, the GFNs' flooding is initiated at post-restore stage (i.e. running stage), as soon as the restoring completed, the flooding is starting.
>
>Thanks,
>Zhang Haoyu
>
>>--
>> Gleb.
Should we focus on the first bad commit(612819c3c6e67bac8fceaa7cc402f13b1b63f7e4) and the surprising GFNs' flooding?
I applied below patch to __direct_map(),
@@ -2223,6 +2223,8 @@ static int __direct_map(struct kvm_vcpu
int pt_write = 0;
gfn_t pseudo_gfn;
+ map_writable = true;
+
for_each_shadow_entry(vcpu, (u64)gfn << PAGE_SHIFT, iterator) {
if (iterator.level == level) {
unsigned pte_access = ACC_ALL;
and rebuild the kvm-kmod, then re-insmod it.
After I started a VM, the host seemed to be abnormal, so many programs cannot be started successfully, segmentation fault is reported.
In my opinion, after above patch applied, the commit: 612819c3c6e67bac8fceaa7cc402f13b1b63f7e4 should be of no effect, but the test result proved me wrong.
Dose the map_writable value's getting process in hva_to_pfn() have effect on the result?
Thanks,
Zhang Haoyu
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
